Monday, December 31, 2012

NOKIA 3110c Blinking

ASALAMUALAIKUM WR WB


Before i explain anything here i would like to say a greet to the all friends whose came here to my blog. Happy New Year of 2013, let's left behind all bad fortune for 2012 and wish for everything would be great on 2013.
Today we gonna resolve the troubles happen to NOKIA 3110c that blinking only, so the device wants be start.
The only tool have to prepare is UFS-3 the Tornado box.

1. Open UFSDCx_BB5, fill at least MCU in Files and Settings then you can do Check to your device connection.
why should i use UFS just because my MX Key do this job like a dumb.
Next you can try to do something like read info, etc. But you should to know that in my case i can't do further except to connect the device to UFS, but this more lucky for me than i can got anything like MX Key did.
This tell us how was the trouble are very significant happen to flash chip ic. And we need to perform flashing the device to get it backs to the good condition. But you may need to know what is exactly cause of the whole errors to the phone. By the files in Files and Settings we can perform Self Test to learn it.
Check below what's wrong

2. Click Self  Test to look up the troubles are.
They means terrible, nothing say OK, the whole firmwares has corrupted. The only need to do is a full flash.

3. Before we performing full flash we better to backup everything that still can readout from the phone, and fortunate i can still backing up the most important BB5 phone Certificates from the phone. Holly Allah thank you.
We should to know that in some case i've handled it can fix only by restore phone to the factory by Ui Settings. But it doesn't at now

4. Now you have to fill all firmwares to start the full flash process. Make sure you have chosen the right firmwares you need. So you can click the Write Flash command button. And wait it finished

5. For the last step is perform Ui Settings. Then after it completed the phone would able to boot to the Test Mode. That mean you can completely perform phone backup including PM files and so PM 308 that is really necessary.

That all we need to to fix the problems to the phone. I hope you enjoy it
THANK YOU

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Saturday, December 29, 2012

Phoenix Service Software 2012.36.001.48629

ASALAMUALAIKUM WR WB


Main component versions in the release:

• Product API 2012.31.2
• Nokia Connectivity Cable USB Driver Version 7.1.78.0
• Flash Update Package 2012.30.1
• FUSE Connection Manager v 2012.27.4

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2012.24.0.48366

Error Corrections & changes:
New products: RM-908, RM-909, RM-872, RM-873, RM-874, RM-907

Supported operating systems and user rights

• Windows XP Service Pack 1 or higher
• When installing Phoenix into Win XP you must have local admin rights.
• When using in Win XP, user must have power user rights.
• Windows 7 32 Bit version
• Windows 7 64 Bit version (Please note that FLS-5 drivers do not support Win 7 64 bit OS, therefore FLS-5 can not be used in this operating system)
sahassan82


wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]



Friday, December 28, 2012

Flashing CROSS P1T [ MTK 6252 ] via MCN Pro

ASALAMUALAIKUM WR WB

First before you do a job further there is some tricks to make the able to boot by USB on MCN Pro Box.

1. You have had MTK USB VCOM installed on your system
2. One piece of Keyboard dome for phone booting key
3. MCN Pro Box with correct COM setting
4. Flash cable No. 30 [ C5C ]

How to do :

1. Prepare little piece of transparent tape and a dome keypad

2. Open your front case of phone, place the new keypad you've made on the left up corner of your phone board. See picture below.

3. I assume you have prepared your MCN Pro box already, now open this program. Check it on Device manager does it has right COM setting

4. Set your MCN Pro to scanning usb by click Usb Scan button.

5. Make settings as picture below, then click button no.2 [ Holding Power On Read Status ] but you do not need to press and hold the power button and it will keeps scanning.

6. Next to start scanning the pinouts just click Start button, then press and hold your new boot button and then press and hold power button too. See what will happen

7. When MCN Pro has detect pinouts and your device your system will show you a pop-up on the bottom right corner of MTK USB Port ready to use. You can start to do everything to your device by now. See in Device Manager where the port is

8. Before starting any job you better SAVE it firts then APPLY to box. Then you can do more

9. Now backup your device firmware first before doing some fixes to the device

10. Now do what you wanna do to your device 'cause you have detect it nicely via MCN Pro Box.
THANK YOU FOR COMING

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Thursday, December 27, 2012

NOKIA 3110c Common Hardware Troubles

ASALAMUALAIKUM WR WB

1. NOKIA 3110c Camera troubleshooting


2. NOKIA 3110c Display, Illuminations, and Keyboard troubleshooting

3. NOKIA 3110c Components Placement

4. NOKIA 3110c Keyboard Jumpers

Those all we need to know.
Thank you for coming
wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]



Wednesday, December 26, 2012

Backup .ask and .pm Files

ASALAMUALAIKUM WR WB

Tools needed:
a. MX Key
b. A USB Cable [ 'cause i don't need HTI Box ]

Steps:

1. Open mobileEx, give a firmware file at least 

2. Press Bus Check button

3. Click Service tab, Choose IMEI & Security then Read Ask for reading .ask and make a backup file

4. Save .ask file created wherever you want

5. Next in Service choose PM, click Read to backup .pm file

Make sure all PM block has check that mean the .pm you have made backup lately is good .pm file

That's all we learning for today, have a nice day to you all

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Tuesday, December 25, 2012

Flashing SAMSUNG Champ Duos E 2652 W

ASALAMUALAIKUM WR WB

SAMSUNG GT-E 2652 W cannot start. The phone freeze on USB connection mode on the display. Have tried some tricks using flasher box including UFS Tornado but undone. On UFS i've tried to change USB connection until USB 2 but still didn't detect the phone
Try to emergency recovery using SAMSUNG KIES has the same problem, even when i have update SAMSUNG KIES to earlier version its still blind, the driver still not detect the phone.
So i doing this for the last try and successful, I'm so sorry that i'm rarely to share the whole process of flashing samsung mobile to all my friends. Because the reason of the difficulty to do repair software on samsung mobile. Even with the same tool and software not all phone technician can do. There always be a problems to do.
But now i'll show you how to get back your phone to normal. Only showing how not teaching cause i'm an amateur man.

1. Close other program for samsung. Make sure nothing opened.
2. Install Infineon USB flash driver or USB cable driver to your system, reboot your system.
3. Open a program named Infineon Flashtool.

4. Click Browse button to Add every needed firmwares for flashing mobile process, step by step just click the picture above to see the details.
5. Insert phone battery to the phone, plug USB cable of CA-101 type to one of your PC port.
6. Press and hold volume UP and Lock buttons at the same time, while holding those 2 button plug USB cable to your phone and don,t release your hold. Quickly click NEXT button.
7. A new window will show, with still pressing both button click Start USB 1 button, and will inject EBL to your phone.


8. When the phone has detected by it, the flashing process will automatically start. Remember do not doing anything unnecessary while process in progress or you'll break the phone permanently. This is your own risk i have no responsibility to the damage to your phone, so think before you doing.
9. Wait until flashing completed. It will showing you SUCCESS notification on the up side of progress bar and on the log. That mean you have done.


10. Finished

In case you can't establish a connection of phone to the PC you can click FILE > USB Map Wizard. Or you can press Ctrl + U to repair the connection

a. In the window you can following whatever note there

b. Unplug USB out of phone and so the battery, then click the NEXT button.

c. On the next window shows, plug back USB to phone then battery and hold a while the phone power button until you have notification of USB Flash Loader Utility on the corner of your PC display. Then reverse to the step number 6

Hopefully Useful


wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Sunday, December 23, 2012

NOKIA X2-02 RM-694 No Illuminations

ASALAMUALAIKUM WR WB

There are no illuminations for the display and keyboard happen to NOKIA X2-02 RM-694. 
In my case resolve by made jumpers to on board LCD display socket.

Watch the pictures

1. Schema ways to display and keyboard led

2. The electronics components may damage on each cases

3. Components placing on the board

4. Finally to do wiring the lines

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]