Thursday, May 23, 2013

Full Flashing Nokia 5730S via MXKey v3.5 Rev2.6


Before doing full flashing on each phone generation of NOKIA we need to do some important steps at first. At least we've backup the original phone data, so when comes any trouble after flash we have the medicine to make it back to the condition. Lately i really don't want to buy a new F-bus flash cable anymore, because it will useless by time. So what we need is only a compatible USB cable. Now let's do it

Open mobilEx v3.5 rev2.6, chose Nokia USB ROM for connection. Press Connect then chose Nokia Service Tool.
If you have made correct setting on MXKey Settings for product path, you can put your phone firmware folder into it.
And it will automatically added to the Files setting when Browse button pressed.

Go ahead
After all files added press Bus Check. If you have error in connection you can try my method:
First before Clicking Bus Check do not plug the USB cable to phone. Remove Battery from phone, make sure battery charged.
After click Bus Check see to mobilEx log, there will be a message 'Waiting Nokia USB ROM device..' this is the time to plug the USB cable to the phone, and then insert battery to phone. Now MXKey should detect the device. Reply again if doesn't work. In error making configuration of mobilEx and phone continuously it could be a hardware problem to the phone. You can check VIO on the machine.

If there is nothing problem to configuration phone and mobilEx, now we can do more further steps.

On the establish connection we can see to the log of phone software specifications readout. Be careful to the message comes on the log because it will warn you when a job is too risk to do. for example see one of the message as below 

Now tab Service before doing full flash. you can get everything important about the phone there. You can perform Test the phone, backup phone PM data and so the most important is backing up the .ask or .rpl if it support. If you can't backup .rpl you can only backup .ask then you can calc the .ask to .rpl using UFS Tornado.

You better to backup the important data from the phone on the next step

If you want to check out the hardware trouble to phone you can go to Phone Test

Go to IMEI & Security for solved some problems list there. If you want reset user code you can do there.

Read simlock status on phone

Backup .ask or .rpl

If want to repair .rpl or unlock the phone go Online Logger

If only want to perform full flash now its the time, cause every important data have backed up
back to tab Flash and press Flash button

Wait untill finish flashing process then tab Service back, read Phone info and press Reset All

Say YES to the warning

All done and safely disconnect pull out USB cable and phone battery

Have a nice day, Thank you 
Thanks to Ygene 'Igor' Kolarovsky

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Baca juga posting