XPERIA ST26i Jlo Bootloop

ASSALAMU'ALAIKUM WR WB

Diagnose:

• System download on the screen
• Dead in few seconds

Run your latest tool

Tab PDA choose phone and make USB as an  interface

Tab SETTINGS mark some items

Tab PDA, hit IDENTIFY. Plug USB and insert battery

Add cure medicines on FIRMWARES, hit FLASH, disconnect USB pull out battery. Reconnect USB insert battery.

Wait the happy ending report at the very bottom.

Take off usb cable and battery. Let it free for a while. Reinsert battery and turning on the device. VOILA...it's back to normal.

THANK YOU

wassalamu'alaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

SAMSUNG C3303K Sleep/WakeUp button Not Working

ASSALAMU'ALAIKUM WR WB

 Check Results:

• Won't wakeup when phone in sleep mode
• Phone goes turning off if wakeup button on press and hold for few seconds.

Check points to resolving:

- Check whether 2.8v is true on TACT_HID pin #2

- Press TACT_HID and check 2.8v on pin #1 of  TACT_HID, if FALSE replace it.

- If all goes false check connection lines from TACT_HID pin #2 to TACT_DN pin #2, C302, and R224.

- Check ZD303 if it's OK use multitester with 1X measurement.

Read pictures below to perform repairing:

Due to my case, i've made it by rehot U306 block area. [ 325 degree flow and 2,5 air in 'bout 30 seconds ]

But be careful if you need to rehot UCP200, i do not recommend you to do this if you don't have full firmware backup and a new UCP200 for replacing if something goes wrong.

BE CAREFUL AND GOOD LUCK

wassalamu'alaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]