SAMSUNG C3303K Sleep/WakeUp button Not Working

ASSALAMU'ALAIKUM WR WB

 Check Results:

• Won't wakeup when phone in sleep mode
• Phone goes turning off if wakeup button on press and hold for few seconds.

Check points to resolving:

- Check whether 2.8v is true on TACT_HID pin #2

- Press TACT_HID and check 2.8v on pin #1 of  TACT_HID, if FALSE replace it.

- If all goes false check connection lines from TACT_HID pin #2 to TACT_DN pin #2, C302, and R224.

- Check ZD303 if it's OK use multitester with 1X measurement.

Read pictures below to perform repairing:

Due to my case, i've made it by rehot U306 block area. [ 325 degree flow and 2,5 air in 'bout 30 seconds ]

But be careful if you need to rehot UCP200, i do not recommend you to do this if you don't have full firmware backup and a new UCP200 for replacing if something goes wrong.

BE CAREFUL AND GOOD LUCK

wassalamu'alaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

GT-S5360 can't mount data Rebooting [ Bootloop, Hang logo, Restart or something ]

ASSALAMUALAIKUM WR WB

Open Device Manager, check device

PIT is the most important

Load all need, let checksum do the job. Enter device to recovery mode, attach to pc. Hit START to performing.

Let it cleans unnecessary, wait device to rebooting.

What kind of sound do you hear?

 EXIT

wassalamualaikum wr wb

                                                     

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

ODIN v3.10

ASALAMUALAIKUM WR WB

Chainfire

DOWNLOAD

Changelog:

- Updated: SuperSU v0.95

- JellyBean-related bugfixes

- Added: Support for:

--- US Cellular Galaxy S3 SCH-R530

--- VZW Galaxy S3 SCH-I535 (unlock bootloader !)

--- Samsung Galaxy Note GT-N7000B

--- Samsung Galaxy Note 10.1" GT-N8000 

--- Samsung Galaxy Note 10.1" Wi-Fi GT-N8010/N8013 

As usual, Google Play may take a few hours to update.

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

UPGRADE SAMSUNG GT-S5360 Young [ offline ]

ASALAMUALAIKUM WR WB

By the reason of bad internet connection we have, we still can do upgrading our SAMSUNG GT-S5360 Galaxy Young without doing OTA.

First time i want to say great thank to my friend Doky73 who made this offline method run clearly. This is called a great job guy. Milions tumbs to you

Ok, through this we need a USB cable that include in SAMSUNG product we bought. A little tool of ODIN and don't forget the latest firmware for our galaxy young. The latest firmware can be check on samfirmware or everywhere you know.

1. Open ODIN v3.xx and pick firmwares for PDA, MODEM, and CSC

2. Ince you ready with all firmwares turn off your Young. Take out simcard and exkternal memory of the phone. Now press and hold HOME+Vol DOWN+Power to make the phone into download mode. Then plug USB to PC and next to Young..

3. Don't do anything to cancel the upgrade once ODIN running. Cause you'll got your Young box. After upgrade the firmware ODIN will run RESET, here odin clean up system in the phone nothing will save if you don't have back it up before, it's pretty clean. Just wait formating completion so you don't need to push hard reset after whole flashing finished.

4. Next green PASS message will show, that mean everything done. Now you can unplug the USB and close ODIN.

All your Young new firmware can be found in SETTING > About Phone. To proof it you can connect your Young to the KIES by online. You'll gathering 'bout your Young firmware and the latest firmware for.

Just a word to say; Hi, Doky...the bundle realy GREAAAT

wasalamualaikum wr wb

Arek Ngajum IsoIso Ae [ The Fully Fuckin' Headache Lion ]

SAMSUNG GT-S5360 Restart

ASALAMUALAIKUM WR WB

I don't think this kind of bootloop, the phone will reboot after showing SAMSUNG logo on the display. It will always reboot before you turn it off, and still can turning off by power button. I've tried to hard reset but it not help.

SAMSUNG KIES doesn't recognize the device. If you got this trouble now you can try what i have done sucessfully.

1. Prepare all needed samsung Y gt-s5360 firmwares

 

2. Open ODIN and fill firmware to the place, take device to download mode state and hit start

 

3. Don't do anything unnecessary during writing process, after flashed phone will reboot and ODIN handling a resetting phone

 

4. Flashing finish when you got PASS message, unplug phone off the pc then close ODIN

 

Last step to turn off phone and take out phone battery. Insert simcard and external memory then turn back phone on. Now your phone should be in good android looking.

Thanks for joining to this site

 

wasalamualaikum wr wb

 

 

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Flashing SAMSUNG Champ Duos E 2652 W

ASALAMUALAIKUM WR WB

SAMSUNG GT-E 2652 W cannot start. The phone freeze on USB connection mode on the display. Have tried some tricks using flasher box including UFS Tornado but undone. On UFS i've tried to change USB connection until USB 2 but still didn't detect the phone

Try to emergency recovery using SAMSUNG KIES has the same problem, even when i have update SAMSUNG KIES to earlier version its still blind, the driver still not detect the phone.

So i doing this for the last try and successful, I'm so sorry that i'm rarely to share the whole process of flashing samsung mobile to all my friends. Because the reason of the difficulty to do repair software on samsung mobile. Even with the same tool and software not all phone technician can do. There always be a problems to do.

But now i'll show you how to get back your phone to normal. Only showing how not teaching cause i'm an amateur man.

1. Close other program for samsung. Make sure nothing opened.

2. Install Infineon USB flash driver or USB cable driver to your system, reboot your system.

3. Open a program named Infineon Flashtool.

4. Click Browse button to Add every needed firmwares for flashing mobile process, step by step just click the picture above to see the details.

5. Insert phone battery to the phone, plug USB cable of CA-101 type to one of your PC port.

6. Press and hold volume UP and Lock buttons at the same time, while holding those 2 button plug USB cable to your phone and don,t release your hold. Quickly click NEXT button.

7. A new window will show, with still pressing both button click Start USB 1 button, and will inject EBL to your phone.

8. When the phone has detected by it, the flashing process will automatically start. Remember do not doing anything unnecessary while process in progress or you'll break the phone permanently. This is your own risk i have no responsibility to the damage to your phone, so think before you doing.

9. Wait until flashing completed. It will showing you SUCCESS notification on the up side of progress bar and on the log. That mean you have done.

10. Finished

In case you can't establish a connection of phone to the PC you can click FILE > USB Map Wizard. Or you can press Ctrl + U to repair the connection

a. In the window you can following whatever note there

b. Unplug USB out of phone and so the battery, then click the NEXT button.

c. On the next window shows, plug back USB to phone then battery and hold a while the phone power button until you have notification of USB Flash Loader Utility on the corner of your PC display. Then reverse to the step number 6

Hopefully Useful

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Ganti Fleksibel SAMSUNG GT-C3050_C3053

ASALAMUALAIKUM WR WB

Step by step to changing SAMSUNG GT-C3050/C3053 Flex cable

Trouble caused by scratched flex cable :

• Restarting phone when any keyboard pressed
• Too many errors result on keyboard UI

1. Open rear cover of  battery container

2. Remove 4 screws then rear case

3. Pull out keyboard flex, remove 4 screws that hold the slider. One of 4 screws is hide under the SAMSUNG hologram, pull the hologram gently like its never touch before. It will looks like never been repaired.

  

4. On the rear face of mainboard you'll find main flex holder, open it and pull the flex out of the holder. Get the mainboard out of the case

5. Remove 4 screws on the back cover of display case, i'm sorry on picture above i show you 2 only the screws. The other 2 screws are on the left and right of camera module. These both screws are hide inside 2 holes rigth on the both corner of  the top display case

6. Remove and change the old scratched/broken flex with the new. Watch the sign on both ends. There are sign LCD and MAIN, think where the most clearest.

7. Put back the rear display case and get the flex out through the square hole on it. Tight the srews back, place your slider as back case for mainboard so do the same to get the flex out through this cover's hole. Connect the flex connecter to the mainboard flex socket don't forget to fold the flex to make it have a good connection to the ground on mainboard metals material.

8. Tight up the mainboard case with its 4 screws then connect the keyboard flex connecter to its connector. Before you doing put back the rear case do trying the slider working. Hold the Display case then slide it UP and DOWN slowly. If there are no faults on the assembling method you'll not finds any trouble. But if can't see the whole main keyboard [alphabetics and numerics] that's mean you have made a fault.

9. See and feel your jobs, it's taste like Mr. president's sallary. Am i dream, haa...haa...haa.....

GOOD JOB GUYS, THAT's MEAN EAT FOR WHOLE FAMILY

SEE YA NEXT....

Thank you for every one in brokencontrollers.com

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]