Asalamualaikum WR WB
Instructions
to unlock bootloader
Known issues
·
It is currently not
possible to unlock the boot loader for CDMA phones.
·
Some customers with
unlocked boot loaders have experienced problems when they are accepting over
the air upgrades (FOTA - Firmware upgrade Over The Air). For customers that
have unlocked the boot loader, please do not accept any over the air upgrades.
For additional information, check out the hints and tips from the community on
the XDA forum.
Instructions
1. First, you should confirm that it is possible
to unlock the boot loader of your phone by checking the service menu. In your
phone, open the dialler and enter *#*#7378423#*#* to access the service
menu.
2. In your phone, tap Service info >
Configuration > Rooting Status. If Bootloader unlock allowed says
Yes, then you can continue with the next step. If it says No, or
if the status is missing, your device cannot be unlocked.
3. On your computer, click Continue at the
bottom of this page to start the unlock boot loader process.
4. Read through the information in the pop up
window and click Yes, I’m sure, if you are still confident you want to
unlock the boot loader.
5. Read through and accept the legal terms. Click
I Accept.
6. Enter your name, email address and the first
14 digits (remove the last digit) of your phone’s IMEI number. Click Submit.
You can view the IMEI number by entering *#06# on your phone.
7. The unlock boot loader key is displayed. Write
it down and save it for later use.
9. Download and unzip this file. This is the standard android_winusb.inf-file,
with a few lines of code added to enable Fastboot to support Sony and Sony
Ericsson devices. Make sure you are running Google USB Driver package revision
4 or higher in your Android SDK. You can see current Google USB Driver package
revision in the SDK Manager.
10. Place the unzipped file in the usb_driver
folder, located in the Android SDK > extras > google folder on
your computer. Accept to replace the old android_winusb.inf-file with the new
file. If you can't find the usb_driver folder, please install the Google USB
Driver Packager using the Android SDK manager.
11. Turn off your phone.
12. On your phone, push and hold the unlock
button* at the same time as you connect the phone to the computer with a
USB-cable. The unlock button may differ between different phone models. See the
note in the bottom of this page for more information on what button use on your
phone.
13. On your computer, you will be asked for
drivers. Point to the usb_driver folder where you placed the
android_winusb.inf-file, and select the Android Boot loader Interface-file.
14. Open a command window and go to the tools
folder within the Android SDK folder.
15.
Enter fastboot.exe
-i 0x0fce getvar version, and verify that you get a response back (for
example "0.3"). This means your phone is connected properly.
16. Warning! If you perform this step, you will unlock the boot loader. This
may void your warranty and/or any warranty from your operator. If you still
want to unlock the boot loader of your phone, enter fastboot.exe -i 0x0fce
oem unlock 0xKEY, where KEY is the unlock boot loader key you got in the
beginning of this instruction. The boot loader should now be successfully
unlocked.
Continue
[ if you want to unlock bootloader by IMEI just click continue button ]
* Hold the following
button while connecting your phone to a computer with a USB-cable:
·
Menu button (for
Xperia™ arc, Xperia™ arc S, Xperia™ neo, Xperia™ neo V, Xperia™ pro).
·
Search button (for
Xperia™ PLAY).
·
Volume up button (for
Xperia™ mini, Xperia™ mini pro, Xperia™ ray, Xperia™ active, Live with
Walkman™, Xperia™ S).
I got this warn from Sony website's, it’s won’t be a bullshit!
wasalamualaikum wr wb
Arek NGAJUM IsoIso Ae [The Fully Fuckin' Headache Lion]
No comments:
Post a Comment