NOKIA ASHA210 Dead Phone solution

ASSALAMU'ALAIKUM WR WB

NOKIA ASHA210 Dead Phone Solution

• Phone must have vibrate on Power button hold
• Copy firmware folder to: C:\Progrm Files\Nokia\Phoenix\Flash

• Open LEGENDARY OLD TOOL UFS-3 TORNADO

• Set product to DCT4 because it's not a BB5 product
• Scroll for RM-924 (210) USB
• Give complete Files: MCU, PPM and CNT ( be careful this kind of CNT has two image files)

• Prepare CA-101 or compatible USB Cable and at least 50% charged battery
• Hit Check on TORNADO, see if it's look like blue blocked log on the picture that's mean you can go ahead to do some more
• Set Flashing Scenario to Flash+UI Options and speed to Normal, check Reset User Lock on UI Option and next hit START
• Wait for the success story!!!

succeeded log of asha 210 flashing:

CPU: GenuineIntel, Sp: 5

Platform: Windows NT 6.1 (Build 7601 Service Pack 1)

Versions: Ufs2xx.dll 3.2.4, Ufs2xx.sys 2.8.14

Current Paths: 

EXE  : C:\Program Files\Nokia\Phoenix

TESLA: C:\Wintesla\

DCT3 : C:\Program Files\Nokia\Phoenix\Flash3\

DCT4 : C:\Program Files\Nokia\Phoenix\Flash\

BB5  : C:\Program Files\Nokia\Phoenix\Flash\

UFxBoot V2.2 (c) SarasSoft 2003. Id:

UFS_USB V2.8 (c) SarasSoft 2007. Sn:

HID:

Features: 00000001

Licence: True

LogFile: .\_!_LOG\XXXXX_92420156_0941_LOG.txt

Insert USB Cable to Switched OFF Phone and Power ON

IF_USB: XGOLDxxx

IF_SBL: XGOLD213, Ok

IF_EBL: Quantum_Bootloader_10.56_M1S1 10.56, Mode: CC

FL_ID : EC001230, Samsung K5N1258ACM 512Mb

ShutDown Done

Rebooting Mobile

Process Failed, Repowering Mobile

Insert USB Cable to Switched OFF Phone and Power ON

IF_USB: XGOLDxxx

IF_SBL: XGOLD213, Ok

IF_EBL: Quantum_Bootloader_10.56_M1S1 10.56, Mode: CC

FL_ID : EC001230, Samsung K5N1258ACM 512Mb

MCU FLASH BUNDLE: 1FBBABE4_rm924__06.09.mcusw

Flash File: rm924__06.09.mcusw_ebl_psi.fls

Erase Area: 0x40000000 - 0x4001FFFE, Erased: 00:00

Write Area: 0x40000000 - 0x4001FFFE, Written: 00:00

Erase Area: 0x40040000 - 0x4005FFFE, Erased: 00:00

Write Area: 0x40040000 - 0x4005FFFE, Written: 00:00

Erase Area: 0x40060000 - 0x4015FFFE, Erased: 00:02

Write Area: 0x40060000 - 0x4015FFFE, Written: 00:02

Erase Area: 0x40280000 - 0x41CBFFFE, Erased: 00:56

Write Area: 0x40280000 - 0x41CBFFFE, Written: 00:52

Erase Area: 0x43E20000 - 0x43E5FFFE, Erased: 00:00

PPM FLASH BUNDLE: BE647635_rm924__06.09.ppm_x

Flash File: package_x.ppm_ebl_psi.fls

Erase Area: 0x41CC0000 - 0x422FFFFE, Erased: 00:12

Write Area: 0x41CC0000 - 0x422150BA, Written: 00:10

CNT FLASH BUNDLE: 0805CB8F_rm924__06.09.image_x_059R797

Flash File: package_x_059R797.image.fls

Erase Area: 0x42300000 - 0x43E1FFFE, Erased: 01:40

Write Area: 0x42300000 - 0x42EBFFFE, Written: 00:24

Erase Area: 0x43E60000 - 0x43F3FFFE, Erased: 00:02

Flashing Done: 04:28

ShutDown Done

Set Security Ok, Time: 00:28

All Done, Time: 05:03

wassalamu'alaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

NOKIA C1 No Lights

ASALAMUALAIKUM WR WB

The problem come when this device trying to practice swimming to the swimming pool.

The device completely dead cause of short circuits. Have fixed and have the second live on the DC psu detection. But its truly dark at all. I can only heard NOKIA start up sound to indicate the device is work.

Commonly with the type of its LCD, it will has lights on when replacing the LCD with the new one.

but it doesn't work for the light. Its only give me ui on the LCD, but its more better i think than nothing.

All lines have checked and no problems.

But i loss everything need to lights on. Its terrible. But the way i took may resolving you have as mine. Let try my trial.

First remove INDUCTOR L2401 and FET Transistor V2401. Remove pin number 1,2 and 3 on LCD flex. Don't connect to the pcb. Separate the 3 of flex pin with piece of paper tape, so they won't connected to the pcb.

Next make jumper from flex pins number 1 to number 3 then connect to pin number 4 to make pins number 1 and 3 in grounded condition.

Then make a jumper from lcd flex number 2 go to C2402. And so make a make a jumper from C2409 to the ANODE of diode V2400.

Now turning on the device, see does it bring light on for LCD. If YES check the keyboard light too. Does it lights on. IF no light for the keyboard do this steps.

Remove the LED keyboard V2406 and INDUCTOR L2402.

Then you can make jumpers like below

Now turn on back the device, do you have all your lights works as mine

If everything you have done as same as i show here but you don't bring the lights back, that mean you need more learn the lights process on the device by understanding of what the schematic diagram saying.

THANK YOU VERY MUCH

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

NOKIA 6120c Keyboard Trouble shooting

ASALAMUALAIKUM WR WB

In order to finishing trouble shooting on NOKIA 6120c Keyboard problems

merci beaucoup

شكرا

dankie

তোমাকে ধন্যবাদ

salamat

terima kasih

ขอขอบคุณคุณ

감사합니다

ありがとう

danke

dank u

¡gracias

谢谢

謝謝

با تشکر از شما

matur sembah nuwun ingkang agung dumateng poro pamiarso

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

NOKIA 302 Asha short by Water Accident

ASALAMUALAIKUM WR WB

NOKIA 302 Asha RM-813 mati total yang di akibatkan oleh air. Hal yang mungkin terjadi dikarenakan ponsel terjun ke air, berendam, mandi karena bau badannya sudah cukup menggangu ponsel disekitarnya. Hee..hee...heee...

Yuuk kita betulin. Ikutin aja cara yang ditempuh wong bodo ini.

1. Telanjangi ponsel anda dan keluarkan PCB, lepas bagian yang dapat dipisahkan dari PCB seperti kamera dan layar LCD. Bila layar LCD basah kuyup seperti yang terjadi pada ponsel yang saya perbaiki, bungkus layar LCD menggunakan tisu toilet kurang lebih 3-4 lapis agar air terserap keluar.

2. Rendam PCB ponsel ke dalam larutan arpus cair yang tidak terlalu kental. Diamkan selama kurang lebih 30 menit agar arpus cair meresap ke bagian dalam seluruh pin-pin BGA ic ponsel.

3. Kemudian keluarkan PCB dari rendaman cairan arpus, letakkan pada penjepit PCB ponsel dan tetesi seluruh permukaan PCB yang dipenuhi oleh komponen elektronika dengan cairan songka yang juga berwarna kuning kecoklatan. Biasanya anda beli di toko spare part ponsel.

4. Panaskan permukaan PCB yang telah dilumuri cairan songka menggunakan blower hot air anda. Lepas kaleng pelindung ic pada masing-masing bagian ponsel.

5. Bersihkan cairan songka dan arpus yang menyelimuti seluruh permukaan PCB menggunakan cairan IPA. Lihat dengan kasat mata komponen apa saja yang rusak atau hangus akibat terjadinya short antara kutup Positif baterai terhadap kutup Negatif baterai. Buang dan ganti komponen yang rusak/cacat.

6. Bila komponen yang rusak telah diganti namun masih terjadi short, periksa secara teliti komponen ( terutama kondensator ) yang terhubung langsung pada jalur VBAT menuju GROUND. Bila ditemukan ganti dan periksa lagi yang lainnya.

Sedikit tips dari wong bodo : untuk memeriksa apakah sebuah kondensator short/korslet, tempelkan jarum merah multi tester ke bagian GROUND PCB. Sementara jarum hitam multi tester gunakan untuk memeriksa pin inner kondensator.

Bila semua telah selesai, kembalikan ponsel seperti semula jangan biarkan ponsel tetap dalam keadaan telanjang bulat, hee3x...

Karena kerusakan semacam ini tergolong dalam kerusakan hardware, maka apabila anda melakukan pekerjaan dengan teliti dan benar dalam tempo yang sesingkat-singkatnya maka ponsel anda akan seperti gambar dibawah ini saat dihidupkan

Bila tidak seperti gambar tersebut, periksa lagi lebih detil dan teliti.

SEMOGA BERMANFAAT

Happy New Year to my friends on DryCoolAre russia

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

NOKIA 3110c Common Hardware Troubles

ASALAMUALAIKUM WR WB

1. NOKIA 3110c Camera troubleshooting

2. NOKIA 3110c Display, Illuminations, and Keyboard troubleshooting

3. NOKIA 3110c Components Placement

4. NOKIA 3110c Keyboard Jumpers

Those all we need to know.

Thank you for coming

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]