NOKIA RM-1035 Blinking Keypad SOLUTION 2021

 Assalamu'alaikum Wr Wb

Well, after so long never been made any post. Now i'll try to start again.

Today we gonna discuss on how to handling Blinking Keypad only happen

to NOKIA RM-1035 aka nokia 103.

Let's prepare all tools needed

All you need can be found on google easily

First at all install Miracle cracked ( i'm using v2.82 )

Second install NOKIA MTK FLASH DRIVER in case we will flash mtk phone platform

Third need nokia firmware for miracle box ( usually use .bin extension )

Now Time to start

1. Open/Run Miracle Box Cracked

2. On open Miracle Box app first click on CONNECT BUTTON

3. Click Write on Service Tab

4. Select Boot RM1035 on Boot Select Drop down

5. Tick on Only Firmware

6. Last to be fill is NOKIA FIRMWARE.bin by browse it saving folder

7. Next click START BUTTON to perform flashing

8. Insert Battery into phone and plug in usb to it's port

9. Automatically MBC will detect device, Just wait 'till it finished the job

 

10. After gaining 91% flashing process it will stop and say Writing ERR2: 5A

But Don't worry, plug out usb cable out of device and so the battery.

Insert back the battery and turn on the device and see what next on your  device

CLOSE ALL FROM YOUR PC

GOOD LUCK

By The THE NAME OF HOLLY ALLAH SWT

wassalamu'alaikum wr wb

 

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ] 2021

NOKIA 101 rm-769 dead phone flashing

ASSALAMU'ALAIKUM WR WB

Tools:

1. A dead phone NOKIA 101

2. Firmwares

3. UFS Tornado

4. UFC BB5 7pins

Pinouts:

Steps:

1. Open DCTxBB5, Connect.

2. Set some settings as below picture, CHECK.

3.WRITE FLASH

4. Check RESET USER LOCK after Flash Finished.

5. Do UI SETTINGS job

6. Yet it just finished, if u can't do UI SETTINGS. Turn on your device go to MENU and do FACTORY SETTING.

HAVE A GOOD DAY and Thank You

wassalamu'alaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Flashing [ Refurbish ] Asha 200 RM-761

ASSALAMUALAIKUM WR WB

Preparation:

1. Data Package Manager

2. Phoenix Service Software

3. 60% charged battery

4. USB cable

5. Your Brainware

Launch Application Launcher

Double click Data Package Manager, fill Product and so Product code. Go Search and Download.

Back to Application Launcher, double click Phoenix

Go to File > Open product > rm-761 double click it

Fuckin' Refurbish to start flashing, do advice command.

Watch and wait.

Close on completion

Turn ON device, again doing Factory Setting from menu and choose all

Make device more better

Fuuuuuuuuhhh!!!!

LOG:

Flashing started

Creating product data items list

Product data items list created

Backup not required

Flashing phone

Initializing

Download files list initiated

Waiting for USB device...

Booting...

Sending EBL loader...

Sending EBL...

Boot successful

Downloading file: rm761__11.95.mcusw

Erasing 131070 bytes...

Total progress: 6%

Sending data...

Total progress: 13%

Erasing 131070 bytes...

Total progress: 20%

Sending data...

Total progress: 26%

Erasing 1048574 bytes...

Total progress: 29%

Total progress: 31%

Sending data...

Total progress: 40%

Erasing 25165822 bytes...

Total progress: 42%

Total progress: 44%

Total progress: 46%

Sending data...

Total progress: 48%

Total progress: 50%

Total progress: 52%

Erasing 262142 bytes...

Total progress: 60%

Downloading file: rm761__11.95.ppm_x

Erasing 6792342 bytes...

Total progress: 62%

Total progress: 64%

Total progress: 66%

Total progress: 68%

Sending data...

Total progress: 71%

Total progress: 74%

Total progress: 77%

Total progress: 80%

Downloading file: rm761__11.95.image_x_059K961

Erasing 17956862 bytes...

Total progress: 82%

Total progress: 84%

Total progress: 86%

Sending data...

Total progress: 88%

Total progress: 90%

Total progress: 92%

Erasing 917502 bytes...

Total progress: 100%

Resetting device

Mobile device flashing completed.

Waiting for phone to boot up

Bootup successful

Verifying communication to product (before flash finalizing) 

Communication verified

All operations completed

Firmware updating successful.

wassalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

NOKIA 5250 White Screen

ASALAMUALAIKUM WR WB

Diagnose:
White Screen when turn on. Dead after few seconds [won't boot up ]

Let's repair

1. Download full package of rm-684 firmware as same as your device product code [ex: 059Cxxx]. For more convenient use Data Package Manager.
If you do not change path setting there will save on C:\Program data\Nokia\Packages\Products [ you can found it by viewing hidden files and folders. When you have package downloaded by third party tool as Navifirm + please put the folder in that path.
2. Open Phoenix Service Software [ alternate when UFS and MXKey can't help me to resolved ]
    a. Click File and select Open product
    b. Click Flashing select Firmware update
    c. Click browse to select correct firmware

 3. On Data Package full firmware, there will be a firmware for rm-684 need to write to the SD Card exist. To find it click Option then light that and Delete. 'cause we do not need that.

 4. Check [v] Dead Phone USB Flashing to turn on REFURBISH button and hit it.

5. By this pop-up Connection manager boot up your device into download mode using compatible USB and charged battery.

 6. Wait the moments for the refurbish done. Hit OK when Firmware update successful pop-up message comes and your device BOOT UP.

7. Disconnect device from PC and turn it off. Pull out the battery for a minute then turn it ON for very first time to use.

Note: If it doesn't make you device back, please make sure you have 1,8 volt VIO well. Then backup all important data from the phone. Next remove APE and replace with the new. Doing re-refurbish.

ENJOY!!!

wasalamualaikum wr wb

Arek Ngajum IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Problem(s) after Install NokiaCareSuite ForStore 5.3.112.1425

ASALAMUALAIKUM WR WB

Problem(s) after install NokiaCareSuite ForStore 5.3.112.1425
It's happened to me after i've installed NCS ForStore on my PC. I lost everything that was run well before. As NOKIA said that should uninstall first the old version, i did it.
By the build number of it's i was think that this tool is the newest than i used. But i'm completely wrong.
On this build i have only some new drivers and Plugin update not the tools was install.
I lost every app out of the nokia care suite launcher. Even the launcher never found anymore.
Learning what was wrong i found that this build updating some old driver version and give
some new driver for windows 8 phone driver and or Asha and Lumia devices.
Now what should to do are:
Uninstall NokiaCareSuit ForStore 5.3.112.1425, because it doesn't have any app on the installed tool except the drivers, so just remove it first.
Remove/uninstall all new drivers had just installed already. Remove 'em one by one.
If you have third party tool as REVO uninstaller you'll find all new drivers (simply to find what is new include in the installation ). Remove all folders left over exception for phoenix folder.
If you have apps like UFS, JAF, ATF or other corresponding to the nokia tool they'll need that folder.
Folders need to clean out of you pc:
o C:\Program Files\Nokia\Nokia Care Suite
o C:\Program Files\Nokia\Troubleshooting
o C:\Program Files\Nokia\Envira
o C:\Program Files\Nokia\ZuneDrivers
o C:\Program Files\Nokia\Connectivity Cable Driver
o C:\Program Files\Nokia\3806_USB_Driver
o C:\Program Files\Common Files\Nokia\Fuse
o C:\Program Files\Common Files\Nokia\Service Layer
o C:\Program Files\Common Files\Nokia\Tss
o C:\ProgramData\Nokia\Fuse[hidden]
o C:\ProgramData\Nokia\Nokia Care Suite[hidden]
o C:\ProgramData\Nokia\UCM[hidden]
o C:\Users\[username]\AppData\Roaming\Nokia\Nokia Care Suite[hidden]
Restart pc
Re-install NCS PST 5.0.2013_13.4.4
After finishing NCS PST installation next you can install NCS ForStore 5.3.112.1425.
First it will updating and install new drivers to pc. Next it will install NCS, but by the way it will warn that the newer version installed. And it won't install NCS. After installation finish you better restart your pc. And see again what has just installed on programs and features or use REVO Uninstaller to know.

Bellow what will happen on installation process.

After all drivers and plugin ( visual C++ 2012 ) installed, the NCS ForStore will install it's applications. But because you have just installed NCS PST 5.0.2013_13 already, it won't install again because it is the older version. What need to do is clicking OK and FINISH on the next window.

Look at REVO Unistaller or Programs and Features what's new on your system.

Open NOKIA CARE SUITE Launcher and double click Product Support Tool For Store icon.

It works again with all new drivers installed and allow me again to flashing DEAD RM-914 Lumia 520

You can Flashing, Downloading Lumia Firmwares by the tool

ENJOY!!!

wasalamualaikum wr wb

WE ARE THE JANCUKERS

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

NOKIA C1 No Lights

ASALAMUALAIKUM WR WB

The problem come when this device trying to practice swimming to the swimming pool.

The device completely dead cause of short circuits. Have fixed and have the second live on the DC psu detection. But its truly dark at all. I can only heard NOKIA start up sound to indicate the device is work.

Commonly with the type of its LCD, it will has lights on when replacing the LCD with the new one.

but it doesn't work for the light. Its only give me ui on the LCD, but its more better i think than nothing.

All lines have checked and no problems.

But i loss everything need to lights on. Its terrible. But the way i took may resolving you have as mine. Let try my trial.

First remove INDUCTOR L2401 and FET Transistor V2401. Remove pin number 1,2 and 3 on LCD flex. Don't connect to the pcb. Separate the 3 of flex pin with piece of paper tape, so they won't connected to the pcb.

Next make jumper from flex pins number 1 to number 3 then connect to pin number 4 to make pins number 1 and 3 in grounded condition.

Then make a jumper from lcd flex number 2 go to C2402. And so make a make a jumper from C2409 to the ANODE of diode V2400.

Now turning on the device, see does it bring light on for LCD. If YES check the keyboard light too. Does it lights on. IF no light for the keyboard do this steps.

Remove the LED keyboard V2406 and INDUCTOR L2402.

Then you can make jumpers like below

Now turn on back the device, do you have all your lights works as mine

If everything you have done as same as i show here but you don't bring the lights back, that mean you need more learn the lights process on the device by understanding of what the schematic diagram saying.

THANK YOU VERY MUCH

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Nokia Software Recovery Tool 1.3.1

ASALAMUALAIKUM WR WB

Nokia Software Recovery Tool 1.3.1

by Seidea

Nokia Software Recovery Tool can help you to reset and recover your phone software at home, if your phone is experiencing software related or software update problems. With Windows Phone 8  models, you can also use Nokia Software Recovery Tool  to recover your phone in case your phone is not responding, it appears to be stuck, or it is not starting.

Step 1. Download and install Nokia Software Recovery Tool to your computer (available for Windows 7, or newer). If possible, make sure that your phone is fully charged.

Step 2. Start Nokia Software Recovery Tool, and connect your phone to your computer with a compatible USB cable. If prompted, select the correct USB mode on your phone: Nokia Suite or Modem.

Note! Using Nokia Software Recovery Tool erases all personal content on your phone. If possible, create a backup of your phone’s content before starting the installation.

Step 3. Follow the instructions shown on the tool. The latest version of your phone software will be installed, and your phone will restored back to the factory settings. This process may take some time depending on your internet connection, and you cannot use your phone during the installation.

If your phone is not starting or appears to be stuck, you can also recover your phone with “My phone does not start up or respond option” (only available for Windows Phone 8 models).

Supported Nokia phones:

    Lumia phones

    Asha and Series 40 phones that have USB interface

    Symbian phones

Software Recovery Tool by Seidea

DOWNLOAD HERE

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]