Flashing [ Refurbish ] Asha 200 RM-761

ASSALAMUALAIKUM WR WB

Preparation:

1. Data Package Manager

2. Phoenix Service Software

3. 60% charged battery

4. USB cable

5. Your Brainware

Launch Application Launcher

Double click Data Package Manager, fill Product and so Product code. Go Search and Download.

Back to Application Launcher, double click Phoenix

Go to File > Open product > rm-761 double click it

Fuckin' Refurbish to start flashing, do advice command.

Watch and wait.

Close on completion

Turn ON device, again doing Factory Setting from menu and choose all

Make device more better

Fuuuuuuuuhhh!!!!

LOG:

Flashing started

Creating product data items list

Product data items list created

Backup not required

Flashing phone

Initializing

Download files list initiated

Waiting for USB device...

Booting...

Sending EBL loader...

Sending EBL...

Boot successful

Downloading file: rm761__11.95.mcusw

Erasing 131070 bytes...

Total progress: 6%

Sending data...

Total progress: 13%

Erasing 131070 bytes...

Total progress: 20%

Sending data...

Total progress: 26%

Erasing 1048574 bytes...

Total progress: 29%

Total progress: 31%

Sending data...

Total progress: 40%

Erasing 25165822 bytes...

Total progress: 42%

Total progress: 44%

Total progress: 46%

Sending data...

Total progress: 48%

Total progress: 50%

Total progress: 52%

Erasing 262142 bytes...

Total progress: 60%

Downloading file: rm761__11.95.ppm_x

Erasing 6792342 bytes...

Total progress: 62%

Total progress: 64%

Total progress: 66%

Total progress: 68%

Sending data...

Total progress: 71%

Total progress: 74%

Total progress: 77%

Total progress: 80%

Downloading file: rm761__11.95.image_x_059K961

Erasing 17956862 bytes...

Total progress: 82%

Total progress: 84%

Total progress: 86%

Sending data...

Total progress: 88%

Total progress: 90%

Total progress: 92%

Erasing 917502 bytes...

Total progress: 100%

Resetting device

Mobile device flashing completed.

Waiting for phone to boot up

Bootup successful

Verifying communication to product (before flash finalizing) 

Communication verified

All operations completed

Firmware updating successful.

wassalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

NOKIA 5250 White Screen

ASALAMUALAIKUM WR WB

Diagnose:
White Screen when turn on. Dead after few seconds [won't boot up ]

Let's repair

1. Download full package of rm-684 firmware as same as your device product code [ex: 059Cxxx]. For more convenient use Data Package Manager.
If you do not change path setting there will save on C:\Program data\Nokia\Packages\Products [ you can found it by viewing hidden files and folders. When you have package downloaded by third party tool as Navifirm + please put the folder in that path.
2. Open Phoenix Service Software [ alternate when UFS and MXKey can't help me to resolved ]
    a. Click File and select Open product
    b. Click Flashing select Firmware update
    c. Click browse to select correct firmware

 3. On Data Package full firmware, there will be a firmware for rm-684 need to write to the SD Card exist. To find it click Option then light that and Delete. 'cause we do not need that.

 4. Check [v] Dead Phone USB Flashing to turn on REFURBISH button and hit it.

5. By this pop-up Connection manager boot up your device into download mode using compatible USB and charged battery.

 6. Wait the moments for the refurbish done. Hit OK when Firmware update successful pop-up message comes and your device BOOT UP.

7. Disconnect device from PC and turn it off. Pull out the battery for a minute then turn it ON for very first time to use.

Note: If it doesn't make you device back, please make sure you have 1,8 volt VIO well. Then backup all important data from the phone. Next remove APE and replace with the new. Doing re-refurbish.

ENJOY!!!

wasalamualaikum wr wb

Arek Ngajum IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Phoenix Service Software 2012.50.001.49220(2014.01.13)

ASALAMUALAIKUM WR WB

Phoenix Service Software 2012.50.001.49220(2014.01.13) by seidea

Version 2: 13.01.2014: New Product API installation package and new cmntucsonui.dll added to fix BB5 Certificate Restore error
Please use these additional components only if you experience problems with BB5 Certificare Restore (RM-799, RM-863). Error message “.. Failed to write Tucson data, Security: writing Simlock data, product returned signature error..:”

!!!Development of Phoenix service software has been discontinued, complete installation packages will not be released anymore. Therefore these components must be used to update Phoenix!!!

Instructions:
Install latest Phoenix service software (version in this article)
Run TSS_Product_API.exe
Select “Install Product API” – option
After TSS_Product_API has been installed, copy “cmntucsonui.dll” to following directory on your PC. please replace the existing version of dll with new one.
C:\Program Files (x86)\Nokia\Phoenix – directory on 64 bit machine
C:\Program Files\Nokia\Phoenix -directory on 32 bit machine



Main component versions in the release:

• Product API 2012.46.2.49145
• Nokia Connectivity Cable USB Driver Version 7.1.101.0
• Flash Update Package 12.49.0
• FUSE Connection Manager v 2012.51.1

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2012.50.0.49146

Error Corrections & changes:
New products: RM-647
New products are not implemented to Phoenix anymore. Phoenix development is closed.

IMPORTANT!
Phoenix installation requires a network connection if DOT.NET framework 4.0 is not installed on PC
(.NET framework is downloaded from web during phoenix installation).

New common data package location in use. Please see document SR1315 in KICS Information Center for further information.
All Nokia Service Software Applications will use following location for product specific data:
- Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
- Windows 7: C:\Program Data\Nokia\Packages

Please see articles SR1774 for more information on the use of Nokia Data Package manager – tool, and article SR1854 for more information on the Nokia Service Application Manager Tool.
During installation, Data Packages should be installed in these directories, if they install to any other location by default. Target folder for local data packages can be changed in the installation wizard manually.
This version contains the latest Tucson components. Therefore do not use Tucson Add-On Installation Packages.
Before you start Phoenix or Care Suite installation to Windows 7 the User Account Control (UAC) should be turned off from Windows Control Panel settings.
For more information concerning new options in “Firmware Update” – menu and their use, Please see documents SR1313 and SR1659 in KICS Information Center.
Tucson operations combined with “flash” – option are now handled in the same way as “refurbishment”, which requires Mass Memory Content File to be available.
Use of Flash option simultaneously with product code change for USB Only phones is restricted. It is recommended to flash phone separately with Firmware Update. Please refer to product specific instructions.
Connection media to FLS-5 must be configured to be “USB_FBUS”, after FLS-4 support has been removed FBUS does not work anymore with FLS-5

KNOWN ERRORS & LIMITATIONS
• FLS-5 drivers do not support 64 bit OS, so phones using FLS-5 /USB_FBUS connection can not be serviced in 64 bit operating systems
• N9- RM-696 Product Code change still unreliable
• Product code change is not working with RM-838, RM-852, RM-843. Please use Product identity tool (SR2872)
• Energy Management Calibration should not be performed for products using the “Quantum” engine (RM-689, RM-702, RM-704 and other product using the same engine)
• Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
• Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore. FLS-5 can be used with other product specific cables and adapters, but not with SS-46 Interface Adapter.
• If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
• FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version 11 has been released to correct this. Sales pack code is 0089J83 , old HW version is not delivered anymore
• Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
• When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the first time. Please wait patiently; Phoenix will start after configuration is finished.
• After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC
• It is not possible to program Mass Media Content file to some devices over direct USB cable connection, due to the large size of the file. For these models a feature called “Media Check” has been implemented. When this type of product is connected to service software / PC via direct USB cable the refurbishment option will be disabled. Please use a flash prommer. Affected products using Media Check are: RM-122, RM-175, RM-176, RM-186, RM-246, RM-247, RM-296, RM-297, RM-320, RM-462, RM-472, RM-484, RM-505, RM-555, RM-559
• To be able to use the help files in Windows 7 you need to install Windows Help program (WinHlp32.exe) for Windows 7. Ways to locate WinHlp32.exe:
- Start Phoenix with online connection to Internet, select “Help” and “Phoenix help”. Click the “Microsoft Help and Support” website link. Download WinHlp32 and install it.- Go to http://www.microsoft.com. Type “WinHlp32″ to “Search Microsoft.com” – field. Locate Windows Help program (WinHlp32.exe) for Windows 7 and install it
• When using flash prommers, only one connection type to one prommer is allowed. Please use either NFPD USB or NFPD TCPIP connection to one prommer, not both connections to same prommer

Supported operating systems
• Windows 7 32 Bit version
• Windows 7 64 Bit version (Please note that FLS-5 drivers do not support Win 7 64 bit OS, therefore FLS-5 can not be used in this operating system)

Download Link:
TSS_Product_API
cmntucsonui.dll
2012.50.001.49220Phoenix Service Software

IMPORTANT!
To intercept download using IDM on Bitshare, click Regular Mode for free user > waiting time > captcha verification.
After captcha verification will show Start Download. Do not click the button without holding and press Alt+Ctrl keys on your keyboard.
Enjoy!!!

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Repair Bad Applications On NOKIA X3-00 RM-504

ASALAMUALAIKUM WR WB

Due to bad software repair process can make some troubles to the phone. In case the phone on my hand was middle east variant for the original firmware version. It has changed to Indonesia variant without problem, but all original NOKIA application has gone out of the phone, the owner complain it to the man. But he can't do anything and can't give any reason to the owner. The question is how he can do the flashing to the phone but he doesn't know the problem after. The device can't run any application such as  facebook, opera, and even it could not open an image file.

The only reason is he got flashed a corrupt firmware to the phone, especially on contents file. Come follow me how to fix it.

First download X3-00 RM-504 flash firmware to your computer or you can save downloaded file straight to C:\Program Files\Nokia\Phoenix.

Use Nokia Data Package Manager to download the firmware, it will gives you safe firmware to flash.

Now i have the latest firmware for the phone, and the phone has old firmware version in it.

Next Launch Phonex Service Software. Hit File chose Open product.

Scroll search bar to find the phone type on the next window and hit OK

Next tab Flashing and hose Firmware Update

Then Firmware Update window will show, press Browse to locate Product Path you've made on setting and hit OK

After phone firmware added give check to [v] Dead phone USB flashing

Don't hit Refurbish at now, because exactly what we need is only a content file to write to the phone. Hit Option to edit firmware and delete unneeded file to write. But in my way i want to renew the phone using this latest firmware version, so i do not need to delete MCU and PPM on it.

The blue light above means the firmware need to write. Others unneeded in order if only want to fix application error. Chose one by one MCU and PPM then hit Delete out of the list. [ remember i want to renew so i don't need to delete any ] and hit OK.

Next back to Flashing main menu and prepare USB cable, phone, and so phone battery then press Refurbish

If the window Updating succeeded present hit OK

Pess Close to main window

FINISH

Now turn on the phone. Little setting for time and date need to perform for booting the phone. Pass next settings present.

On the keyboard type *#7780# to reset the phone after flashing. If ask a security code type 12345 and press OK. Wait phone to load again and sett the date and time.

Now go to menu and run all phone applications there.I guarantee to you all of them will run good. That's all what we needs to do.

THANK YOU VERY MUCH

wasalamualaiku wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Phoenix Service Software 2012.50.001.49220(2013.02.18)

ASALAMUALAIKUM WR WB

Phoenix Service Software 2012.50.001.49220(2013.02.18)
by Seidea


Main component versions in the release:

• Product API 2012.46.2.49145
• Nokia Connectivity Cable USB Driver Version 7.1.101.0
• Flash Update Package 12.49.0
• FUSE Connection Manager v 2012.51.1

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2012.50.0.49146

Error Corrections & changes:

New products: RM-647
New products are not implemented to Phoenix anymore. Phoenix development is closed.

IMPORTANT!
Phoenix installation requires a network connection if DOT.NET framework 4.0 is not installed on PC
(.NET framework is downloaded from web during phoenix installation).

New common data package location in use. Please see document SR1315 in KICS Information Center for further information.
All Nokia Service Software Applications will use following location for product specific data:
- Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
- Windows 7: C:\Program Data\Nokia\Packages

Please see articles SR1774 for more information on the use of Nokia Data Package manager – tool, and article SR1854 for more information on the Nokia Service Application Manager Tool.
During installation, Data Packages should be installed in these directories, if they install to any other location by default. Target folder for local data packages can be changed in the installation wizard manually.
This version contains the latest Tucson components. Therefore do not use Tucson Add-On Installation Packages.
Before you start Phoenix or Care Suite installation to Windows 7 the User Account Control (UAC) should be turned off from Windows Control Panel settings.
For more information concerning new options in “Firmware Update” – menu and their use, Please see documents SR1313 and SR1659 in KICS Information Center.
Tucson operations combined with “flash” – option are now handled in the same way as “refurbishment”, which requires Mass Memory Content File to be available.
Use of Flash option simultaneously with product code change for USB Only phones is restricted. It is recommended to flash phone separately with Firmware Update. Please refer to product specific instructions.
Connection media to FLS-5 must be configured to be “USB_FBUS”, after FLS-4 support has been removed FBUS does not work anymore with FLS-5

KNOWN ERRORS & LIMITATIONS

• FLS-5 drivers do not support 64 bit OS, so phones using FLS-5 /USB_FBUS connection can not be serviced in 64 bit operating systems
• N9- RM-696 Product Code change still unreliable
• Product code change is not working with RM-838, RM-852, RM-843. Please use Product identity tool (SR2872)
• Energy Management Calibration should not be performed for products using the “Quantum” engine (RM-689, RM-702, RM-704 and other product using the same engine)
• Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
• Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore. FLS-5 can be used with other product specific cables and adapters, but not with SS-46 Interface Adapter.
• If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
• FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version 11 has been released to correct this. Sales pack code is 0089J83 , old HW version is not delivered anymore
• Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
• When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the first time. Please wait patiently; Phoenix will start after configuration is finished.
• After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC
• It is not possible to program Mass Media Content file to some devices over direct USB cable connection, due to the large size of the file. For these models a feature called “Media Check” has been implemented. When this type of product is connected to service software / PC via direct USB cable the refurbishment option will be disabled. Please use a flash prommer. Affected products using Media Check are: RM-122, RM-175, RM-176, RM-186, RM-246, RM-247, RM-296, RM-297, RM-320, RM-462, RM-472, RM-484, RM-505, RM-555, RM-559
• To be able to use the help files in Windows 7 you need to install Windows Help program (WinHlp32.exe) for Windows 7. Ways to locate WinHlp32.exe:
- Start Phoenix with online connection to Internet, select “Help” and “Phoenix help”. Click the “Microsoft Help and Support” website link. Download WinHlp32 and install it.- Go to http://www.microsoft.com. Type “WinHlp32? to “Search Microsoft.com” – field. Locate Windows Help program (WinHlp32.exe) for Windows 7 and install it
• When using flash prommers, only one connection type to one prommer is allowed. Please use either NFPD USB or NFPD TCPIP connection to one prommer, not both connections to same prommer

Supported operating systems

• Windows 7 32 Bit version
• Windows 7 64 Bit version (Please note that FLS-5 drivers do not support Win 7 64 bit OS, therefore FLS-5 can not be used in this operating system)

IMPORTANT!
Phoenix installation requires a network connection if DOT.NET framework 4.0 is not installed on PC[Microsoft .NET Framework 4 (Standalone Installer)], if you have installed it, you can ignore this.
(.NET framework is downloaded from web during phoenix installation).

GENERATED LINK by SAHASSAN

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Phoenix Service Software 2012.50.000.49146 Cracked

ASALAMUALAIKUM WR WB

Phoenix Service Software 2012.50.000.49146 Cracked


Main component versions in the release:

• Product API 2012.31.2
• Nokia Connectivity Cable USB Driver Version 7.1.78.0
• Flash Update Package 2012.30.1
• FUSE Connection Manager v 2012.27.4

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2012.24.0.48366

Error Corrections & changes:
New products: RM-908, RM-909, RM-872, RM-873, RM-874, RM-907

Please note:

IMPORTANT!
Phoenix installation requires a network connection if DOT.NET framework 4.0 is not installed on PC
(.NET framework is downloaded from web during phoenix installation).

New common data package location in use. Please see document SR1315 in KICS Information Center for further information.
All Nokia Service Software Applications will use following location for product specific data:
- Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
- Windows 7: C:\Program Data\Nokia\Packages

Please see articles SR1774 for more information on the use of Nokia Data Package manager – tool, and article SR1854 for more information on the Nokia Service Application Manager Tool.
During installation, Data Packages should be installed in these directories, if they install to any other location by default. Target folder for local data packages can be changed in the installation wizard manually.
This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Add-On Installation Packages.
Before you start Phoenix or Care Suite installation to Windows 7 the User Account Control (UAC) should be turned off from Windows Control Panel settings.

For more information concerning new options in “Firmware Update” – menu and their use, Please see documents SR1313 and SR1659 in KICS Information Center.
Tucson operations combined with “flash” – option are now handled in the same way as “refurbishment”, which requires Mass Memory Content File to be available.
Use of Flash option simultaneously with product code change for USB Only phones is restricted. It is recommended to flash phone separately with Firmware Update. Please refer to product specific instructions.
Connection media to FLS-5 must be configured to be “USB_FBUS”, after FLS-4 support has been removed FBUS does not work anymore with FLS-5

KNOWN ERRORS & LIMITATIONS

Energy Management Calibration should not be performed for products using the “Quantum” engine (RM-689, RM-702, RM-704 and other product using the same engine)

• N9- RM-696 Product Code change still unreliable

• Nokia 500 RM-750 Refurbish may occasionally fail.

• Product code change is not working with RM-838, RM-852, RM-843. Please use Product identity tool (SR2872)
ain component versions in the release:

• Product API 2012.46.2.49145
• Nokia Connectivity Cable USB Driver Version 7.1.101.0
• Flash Update Package 12.49.0
• FUSE Connection Manager v 2012.51.1

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2012.36.1.48629

Error Corrections & changes:
New products: RM-924, RM-925, RM-926, RM-911, RM-928, RM-929
Datapackage Download-menu removed. Use Datapackage Manager to download phone software. See article SR3456
Phone connectivity improved

All Nokia Service Software Applications will use following location for product specific data:
- Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
- Windows 7: C:\Program Data\Nokia\Packages

Supported operating systems

• Windows 7 32 Bit version
• Windows 7 64 Bit version (Please note that FLS-5 drivers do not support Win 7 64 bit OS, therefore FLS-5 can not be used in this operating system)

IMPORTANT!
HERE IT IS YOUR EASY LINK TO DOWNLOAD

wasalamualaikum wr wb


Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Phoenix Service Software 2012.36.001.48629

ASALAMUALAIKUM WR WB

Main component versions in the release:

• Product API 2012.31.2

• Nokia Connectivity Cable USB Driver Version 7.1.78.0

• Flash Update Package 2012.30.1

• FUSE Connection Manager v 2012.27.4

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2012.24.0.48366

Error Corrections & changes:

New products: RM-908, RM-909, RM-872, RM-873, RM-874, RM-907

Supported operating systems and user rights

• Windows XP Service Pack 1 or higher

• When installing Phoenix into Win XP you must have local admin rights.

• When using in Win XP, user must have power user rights.

• Windows 7 32 Bit version

• Windows 7 64 Bit version (Please note that FLS-5 drivers do not support Win 7 64 bit OS, therefore FLS-5 can not be used in this operating system)

sahassan82

Here is it

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

NOKIA X2-02 Dead Phone Solutions

ASALAMUALAIKUM WR WB

Indeed, this job is a job that I hate all my age. Due to this work is the rest of the other phone technicians inconsequential process. Mobile phones can not be turned on, no display on the screen, no light from the led light. Only shakes from a vibrator when acquiring the power of mobile phone battery.

Here is a freebie and failures when I use MXkey, Even the UFS tornado not real has entirely.

Fortunate to still have a Phoenix Service Software, although it should use the cracked version.

1.  Run Phoenix ssw program

2.  Click the File tab and select Open Product

3.       Select RM-694 (Nokia X 2-02)

4.    Connect the USB to the computer and cell phone, when you are using windows 7 please wait windows 7 drivers detect mobile phones to complete.

5.     After your phone is detected and appears to notice your device ready to use, click the Flashing tab and select Firmware Update.

6.  On the firmware update window click the Browse button next to the Product Code

7.  Select the firmware RM-694 then OK

8.  After the entered on the Product firmware Information, Phoenix SW flashing function keys have not functioning [does not light up]

. 9.Check the Dead Phone Usb Flashing, next buttons that function to run the repair process will turn on [ light up ]

10. Click the Refurbish button to start the flashing process. In the pop-up that appears please just follow in his direction indicated

11. Next you only need to wait, there is nothing you need to do so that it can break the flashing process is running

12. Towards the flashing process  finished the phone will reboot automatically and install the drivers again. You don't need to be panic, just let this process run itself until it is finished

13.  Next when it flashing process done there will be a message Firmware updating succeeded

14. Click OK on the pop-up that appears, release the USB from your mobile phone. Close the Firmware Update window and Phoenix SW at all.

15. Remove the battery for a few moments, plug the battery back in the phone and turn on your mobile phone

COMPLETED

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]