NOKIA RM-1035 Blinking Keypad SOLUTION 2021

 Assalamu'alaikum Wr Wb

Well, after so long never been made any post. Now i'll try to start again.

Today we gonna discuss on how to handling Blinking Keypad only happen

to NOKIA RM-1035 aka nokia 103.

Let's prepare all tools needed

All you need can be found on google easily

First at all install Miracle cracked ( i'm using v2.82 )

Second install NOKIA MTK FLASH DRIVER in case we will flash mtk phone platform

Third need nokia firmware for miracle box ( usually use .bin extension )

Now Time to start

1. Open/Run Miracle Box Cracked

2. On open Miracle Box app first click on CONNECT BUTTON

3. Click Write on Service Tab

4. Select Boot RM1035 on Boot Select Drop down

5. Tick on Only Firmware

6. Last to be fill is NOKIA FIRMWARE.bin by browse it saving folder

7. Next click START BUTTON to perform flashing

8. Insert Battery into phone and plug in usb to it's port

9. Automatically MBC will detect device, Just wait 'till it finished the job

 

10. After gaining 91% flashing process it will stop and say Writing ERR2: 5A

But Don't worry, plug out usb cable out of device and so the battery.

Insert back the battery and turn on the device and see what next on your  device

CLOSE ALL FROM YOUR PC

GOOD LUCK

By The THE NAME OF HOLLY ALLAH SWT

wassalamu'alaikum wr wb

 

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ] 2021

Flashing Dead Andromax C3S NC36B1H [ HAIER ]

ASSALAMU'ALAIKUM WR WB

Symptoms:

-No response when power button Pressed

-No vibrate when power button Pressed

-No display

-Completely dead

Tools and Equipment:

1. Calm and no worry 

2. QPST 2.7.422

3. Qualcomm Driver

4. Fully charged battery & CA 101 USB cable

5. Any working Windows PC.

Steps:

1. Install QPST

 

2. Install Qualcomm Driver

3. Extract ROM in a folder on your desktop

4. Extract and Copy FILES FOR SDCARD to phone external SD, put it back to the

   phone.

   NOTE: you better to format first the sdcard before copying those files to

         sdcard. Backup first your sd external data or you'll lost 'em all.

5. Put SDcard and battery back to the phone. Plug USB cable to PC and so to

   the phone. Windows will detect it as...on Device Manager.

   NOTE: If you have installed NOKIA Windows phone driver before, your phone 

         detected as a NOKIA device/s.

         Open Device Manager first to see if your device detected as Qualcomm

         HUSB 9008 in COM PORT.

         If it's known in Universal Serial Bus controller, then right click it

         and Uninstall to remove the driver conflicts. Do it until Windows 

         detect it in COM Port.

6. I assuming your phones has been detected in Com Port, Now click START and type QFIL on the search box then click it.

7. Click Browse for programmer first to put program file PROG_eMMC_blabla.mbn on it

8. Click Load XML to put xml file and so patch0.xml

9. Click Advanced Settings to change processor type on the drop down menu of  Platform

10. Click Download to start flashing

11. Wait flashing finished, sometimes you'll feel of vibrate on the phone after flashing finished that indicate your phone is getting back alive. Disconnect USB, take off SDcard then Turn on your phone.

WELL DONE

wassalamu'alaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

BlackBerry Q10 www.bberror.com/bb10-0015 error code [ The solution ]

ASALAMUALAIKUM WR WB

NOTE: to every of you who use blackberry, backup your phone to PC before something goes wrong to the device. If you don't you won't bring back any, especially to BlackBerry 10 OS.

            If you in a task like wiping the device do not try to stop it on running, this is a fatal error.

This BlackBerry 10 OS Q10 has problem with error code say 'www.bberror.com/bb10-0015'. That's mean you have to go to the url on your PC to read how to resolved that.

First to do when it happens to the device:

Download and install ltest BlackBerry Link to PC or MAC. Reboot after finished.

If you have already installed BlackBerry Desktop Software for lowest Blackberry OS change setting on it. Go to: Tool>uncheck the word 'Start BlackBerry Desktop when a device connected'.

If you do not, it will disturbing you during process.

How to resolving:

1. Turn off the device do not connect to PC
2. Run BlackBerry Link, once it's open connect usb to the device and PC. If you lucky your device will shown on Device heading.

Forget message 'Cannot Communicate with Device' if Device heading has showing BlackBerry Q10 next you need to do is click 'Reload'. A pop-up will come to confirm with 'Yes' button, because it's too late to backup your data and everything on your device. Nothing can be save anymore.

Or you can go to 'Preference' if something wrong, then choose 'Reload Device Software' > Reload > Close.

Next do the same as above.

3. Now the device software start to download wait with patience until it's 100% downloaded. Do not doing anything during the process. Or you'll send you device to the box.

4. After downloading completed it will extract and load the software to the device. It's won't be long just waiting 'till finished.

5. After 'Flashing' completed BlackBerry Link will boot and rebuild the connection to the device, it doesn't matter if failed. Next pop-up will a matter to you if do not says like this:

6. Why it is failed to communicate with your device ?

Because your device need some setting at first load before it's work, that is the reasons. Unplug usb on device and give settings and follow the steps. You can skip unnecessary setting you don't want. Don't forget to see on the bottom left corner of BlackBerry Link says.

7. After the device settings and you plug in back usb to device, it's knows that you connected the BlackBerry Q10. And make a backup if you want. Because it also make your time more saver when same trouble happens to the device. Since now all have finished. But remember that NO DATA WILL BACK !!!

CAUTION:

I'm using sharing connection with 5,2 MB speed and it taken three and half hours to complete downloading, as you know there will be more than 990mb file size before extracted to download. If you use a weak connection i recommend you not to do this. I also have tried using 3,2 MB/sec of EVDO connection it tooks 13 hours [ no sleeping time since 10 o'clock at night until 2 o'clock next day ] and stopped on 91% downloading. It terrible. If you have 512 KB or upper dial-up cable connection i guarantee you will make it. THANK YOU

wasalamualaikum wr wb

Thank's for support this site to:

http://hanmut.blogspot.com

http://aldynponsel.blogspot.com

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Write GDFS and Change IMEI mismatch

ASALAMUALAIKUM WR WB

NOTE : Make sure you're know what you do with GDFS area on SONY mobile phones. If you've made a mistake on it you better to recycling you device. DON'T DO ANY TO THIS AREA IF YOU DO NOT NEED.

You can see on setool log for mistake to GDFS area on Identify. Cause it will reads all inside your phone software. When you need to repair GDFS ( really need to repair ) may this will help you to do with easily.

1. Open setool2g, for example  i am using K618i of sonyericsson phone.

2. Tab SonyEricsson, choose your phone model. Open a GDFS backup file to MISC Files then hit Write GDFS.

3. After Write GDFS finished next perform phone Identify again. Then you'll know that you have choose a correct GDFS or not. If you use other phone GDFS file you'll got this error message on the log watch below.

4. OK don't worry of its. We gonna fix it now.

5. Now tab Empty Fill & Repair, left everything blank on setool. Type your correct IMEI number and so CID then checked Write IMEI to OTP. NOTE : DO NOT TYPE THE GDFS IMEI WITH RED COLORED LETTERS 

6. Next go to Settings and give checks for some items as below and you'll got a warn there

7. Now back to SonyEricsson and hit Unlock/repair [ no need credit and internet ]

8. Next back to check the phone by Identify, see if there any change to the GDFS area.

9. now try to Read GDFS to save GDFS file with correct IMEI number of the phone to use it when repairing the GDFS of the same phone so you don't have to confusing after repairing the GDFS area  on the phone. It will saves GDFS with correct IMEI.

Thanks dudes

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

W 300 CAN'T LOAD IDENTIFICATION LOADER

       Asalamualaikum wr wb

       Mari kita bahas kasus CAN'T LOAD IDENTIFICATION LOADER yang terjadi pada Sony Ericsson W300. Peristiwa yang saya alami ketika akan menyembuhkan penyakit tidak dapat mengirim pesan singkat.

Tanpa fikir panjang saya langsung melakukan perbaikan pada system software ponsel. Namun yang saya dapatkan adalah hasil dari SETool 'CAN'T LOAD IDENTIFICATION LOADER'. Karena ini terus terjadi setiap saya klik tombol 'Identify' maka saya memutuskan untuk berganti menggunakan XS++. Apa yang saya dapati kurang lebih sama dengan yang dihasilkan oleh SETool, hanya kata-kata nya saja yang berbeda.

       Akhirnya saya memutuskan untuk menggunakan SeDBx dari UFS Tornado. Software yang satu ini dengan mudah dapat menyusup ke boot loader W300 tersebut, maka saya pun langsung memasukkan firmware yang dibutuhkan untuk proses flashing. Ternyata masalah masih belum teratasi, bisa melakukan booting pada ponsel ternyata tidak menjamin sukses menjalankan proses flashing dengan baik. Hasil yang saya peroleh adalah terputusnya proses flashing ketika berjalan 15%, alias masih 15% data MCU atau main firmware yang berhasil ditorehkan kedalam IC Flash.

       Masih belum mau menyerah langkah berikutnya masih menggunakan SeDBx namun dengan menyuntikkan firmware milik XS++. Flashing pun berjalan sukses sampai finish. Ternyata selesai flashing ponsel justru terkunci dengan munculnya pesan 'Configuration Error Please contact...' setelah selesai proses setting theme. Lalu tindakan apa yang harus diambil untuk menyelesaikannya, setelah berhasil membuat ponsel dapat booting via boks flasher kini muncul kasus ponsel terkunci. 

Ikuti saja apa yang saya lakukan, mudah-mudahan anda juga sukses.

1. Gunakan kembali SETool untuk menyelesaikannya.

2. Setelah setool2g terbuka klik tombol 'Identify' kemudian pasang kabel flash ke ponsel. Dan setool2g kini telah dapat melakukan booting ponsel.

3. Kemudian masuk menu setting dengan mengklik tombol 'Setting' beri centang[v] pada 'Signed Mode Using Server' dan 'Customize Phone After Flash'.

4. Kembali klik tombol 'Sony Ericsson' klik tombol 'Add' untuk memasukkan main firmware, kemudian klik lagi tombol 'Add' untuk memasukkan file system (fs) yang merupakan konten bahasa. Gunakan APAC untuk versi bahasa Indonesia sementara untuk main firmware (MCU) anda bisa menggunakan versi CHINA. Jangan lupa untuk mendownload juga file 'Customization' dan ekstrak jadi satu folder dengan firmware MCU dan FS. Setelah anda ekstrak akan menjadi sebuah folder bernama 'TPA'. File didalam folder 'tpa' ini akan secara otomatis tertulis kedalam system ponsel setelah selesai proses penulisan data MCU dan FS. Lanjutkan dengan meng-klik tombol 'Flash'

5. Tunggu proses flashing berjalan sampai selesai dengan munculnya pesan seperti pada gambar di bawah.

6. Untuk mengakhiri seluruh rangkaian proses flashing klik tombol 'Unlock/Repair' dan tunggu prosesnya selesai.

7. Bila pada akhir proses 'Unlock/Repair' muncul pesan unlock 'FAILED' atau gagal biarkan saja, hal ini saya alami disebabkan kredit UNLOCK saya habis atau tidak mencukupi untuk melakukan proses Unlocking.

8. Lepas kabel Flash dari ponsel, keluarkan baterai, pasang kartu sim dan hidupkan ponsel. Tunggu beberapa saat sampai ponsel selesai melakukan setting theme. Bila kita sama-sama beruntung maka ponsel akan langsung loading dan mencari sinyal dari operator. Dan dengan munculnya nama operator anda maka selesailah tugas kita yang enteng tapi berat tersebut.

SELESAI

Personally i would like to say thanks to TOP SONY, Sarassoft Team, SETool Team. 

       Semoga guratan ini dapat menjadikan sebuah perbendaharaan pengalaman baru bagi rekan-rekan, paling tidak untuk saya sendiri. Atas kunjungan rekan-rekan NEWBIE yang telah berkunjung ke blog ini saya sampaikan ucapan terima kasih yang sebesar-besarnya.

ALHAMDUlILLAH satu lagi dapat terselesaikan dengan baik

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae ( The Fully Fuckin' Headache Lion )