NOKIA ASHA210 Dead Phone solution

ASSALAMU'ALAIKUM WR WB

NOKIA ASHA210 Dead Phone Solution

• Phone must have vibrate on Power button hold
• Copy firmware folder to: C:\Progrm Files\Nokia\Phoenix\Flash

• Open LEGENDARY OLD TOOL UFS-3 TORNADO

• Set product to DCT4 because it's not a BB5 product
• Scroll for RM-924 (210) USB
• Give complete Files: MCU, PPM and CNT ( be careful this kind of CNT has two image files)

• Prepare CA-101 or compatible USB Cable and at least 50% charged battery
• Hit Check on TORNADO, see if it's look like blue blocked log on the picture that's mean you can go ahead to do some more
• Set Flashing Scenario to Flash+UI Options and speed to Normal, check Reset User Lock on UI Option and next hit START
• Wait for the success story!!!

succeeded log of asha 210 flashing:

CPU: GenuineIntel, Sp: 5

Platform: Windows NT 6.1 (Build 7601 Service Pack 1)

Versions: Ufs2xx.dll 3.2.4, Ufs2xx.sys 2.8.14

Current Paths: 

EXE  : C:\Program Files\Nokia\Phoenix

TESLA: C:\Wintesla\

DCT3 : C:\Program Files\Nokia\Phoenix\Flash3\

DCT4 : C:\Program Files\Nokia\Phoenix\Flash\

BB5  : C:\Program Files\Nokia\Phoenix\Flash\

UFxBoot V2.2 (c) SarasSoft 2003. Id:

UFS_USB V2.8 (c) SarasSoft 2007. Sn:

HID:

Features: 00000001

Licence: True

LogFile: .\_!_LOG\XXXXX_92420156_0941_LOG.txt

Insert USB Cable to Switched OFF Phone and Power ON

IF_USB: XGOLDxxx

IF_SBL: XGOLD213, Ok

IF_EBL: Quantum_Bootloader_10.56_M1S1 10.56, Mode: CC

FL_ID : EC001230, Samsung K5N1258ACM 512Mb

ShutDown Done

Rebooting Mobile

Process Failed, Repowering Mobile

Insert USB Cable to Switched OFF Phone and Power ON

IF_USB: XGOLDxxx

IF_SBL: XGOLD213, Ok

IF_EBL: Quantum_Bootloader_10.56_M1S1 10.56, Mode: CC

FL_ID : EC001230, Samsung K5N1258ACM 512Mb

MCU FLASH BUNDLE: 1FBBABE4_rm924__06.09.mcusw

Flash File: rm924__06.09.mcusw_ebl_psi.fls

Erase Area: 0x40000000 - 0x4001FFFE, Erased: 00:00

Write Area: 0x40000000 - 0x4001FFFE, Written: 00:00

Erase Area: 0x40040000 - 0x4005FFFE, Erased: 00:00

Write Area: 0x40040000 - 0x4005FFFE, Written: 00:00

Erase Area: 0x40060000 - 0x4015FFFE, Erased: 00:02

Write Area: 0x40060000 - 0x4015FFFE, Written: 00:02

Erase Area: 0x40280000 - 0x41CBFFFE, Erased: 00:56

Write Area: 0x40280000 - 0x41CBFFFE, Written: 00:52

Erase Area: 0x43E20000 - 0x43E5FFFE, Erased: 00:00

PPM FLASH BUNDLE: BE647635_rm924__06.09.ppm_x

Flash File: package_x.ppm_ebl_psi.fls

Erase Area: 0x41CC0000 - 0x422FFFFE, Erased: 00:12

Write Area: 0x41CC0000 - 0x422150BA, Written: 00:10

CNT FLASH BUNDLE: 0805CB8F_rm924__06.09.image_x_059R797

Flash File: package_x_059R797.image.fls

Erase Area: 0x42300000 - 0x43E1FFFE, Erased: 01:40

Write Area: 0x42300000 - 0x42EBFFFE, Written: 00:24

Erase Area: 0x43E60000 - 0x43F3FFFE, Erased: 00:02

Flashing Done: 04:28

ShutDown Done

Set Security Ok, Time: 00:28

All Done, Time: 05:03

wassalamu'alaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

NOKIA 101 rm-769 dead phone flashing

ASSALAMU'ALAIKUM WR WB

Tools:

1. A dead phone NOKIA 101

2. Firmwares

3. UFS Tornado

4. UFC BB5 7pins

Pinouts:

Steps:

1. Open DCTxBB5, Connect.

2. Set some settings as below picture, CHECK.

3.WRITE FLASH

4. Check RESET USER LOCK after Flash Finished.

5. Do UI SETTINGS job

6. Yet it just finished, if u can't do UI SETTINGS. Turn on your device go to MENU and do FACTORY SETTING.

HAVE A GOOD DAY and Thank You

wassalamu'alaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

UFS+HWK New UPDATE v2.3.0.6 [05/07/2014]

ASALAMUALAIKUM WR WB

UFS+HWK New UPDATE v2.3.0.6 [05/07/2014]
Read ATTENTION first on the bottom of this post
Before the version 2.3.0.3 get expired by now you should go to support sarunasoft to download new UFS Panel v2.3.0.6.
This v2.3.0.3 still work for the support ticket, so you better go now. Before it's completely not working anymore.

For peoples have a weak connection you can copy below data to C:\Windows\System.ini if you run Windows 7 to get more good internet connection. So you do not need to be worry of loosing connection on the process.

Copy these under [cmi] by right click System.ini and Edit than SAVE and restart PC or lappy.

page buffer=9000000Tbps

load=9000000Tbps

download=9000000Tbps

save=9000000Tbps

back=9000000Tbps

search=9000000Tbps

sound=1000000Tbps

webcam=1000000Tbps

voice=1000000Tbps

faxmodemfast=9000000Tbps

update=9000000Tbps

NOTE: Please do not BOLD all characters

Torrent the downloaded file using UTorrent, if you can not found the torrent file you can click Complete on UTorrent then right click file and choose Open containing folder.

Next right click UFS Panel 2306 and Run as administrator, connect your UFS Box to PC

See on UFS Panel log what need to do to your box and follow the advice to repair or UPGRADE your HWK.

Click Check Box to see HWK status. After that you can click Update Box. See the log what next need to fix.

After Update Box finished now you have your Account : OK but not to the software.

Then go to Software and click Check Server.

Let's see what's need to fix or update to the software.

Automatically UFS Panel will check your old version and give everything need to upgrade by checked so what need to do is click Install to starting UPGRADE.

Close UFS Panel after whole UPGRADING process finished

ATTENTIONS !!!
1. Do not Uninstall all thing of UFS sarassoft softwares out of your PC it really not needed.
2. Copy UFS Panel v2.3.0.6 from UTorrent download folder to Start > All programs > Sarassoft > UFS > Utility. So you can run it from Start menu and so paste to C:\Program Files\Sarassoft\UFS\UFS_Panel.
3. Disconnect UFS to PC after UPGRADE and restart your PC.
4. Run UFS and Enjoy !!!

Most update are SAMs and LG for the biggest.

THANK YOU

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Repair Bad Application On NOKIA 5800 XpressMusic RM-356

ASALAMUALAIKUM WR WB

Again i will show how to repairing some bad application happens to NOKIA 5800 XpressMusic. Some Features on this phone won't run when try to opening.

What we need for this job are : UFS Tornado or you can use mobileEx dongle with USB cable, Nokia 5800 XpressMusic RM-356 firmware and the last one is our brainware.

1. Run UFS_DCTxBB5. Connect it to your PC.

Tab BB5 and choose RM-356 on the Phone Type then Check

2. Make a little change on UFS Tornado settings like i do on the below picture. It's the most safety way for me to do flashing any phone.

3. I'm so sorry to all of my friends comes to this blog, that i could not give you more complete demos pictures. Because this blog now become to slow to load, i think the pictures here is the one of it causes. So i can not give you more clear steps indeed. Again sorry 'bout that.

4. Give Files and Settings Fields at least Content file or other like MCU and or PPM. Then hit Info of the phone software. You can perform more additional task on UFS to backup something important from the phone.

5. If you do Verify [ works only for BB5 generation ] you can read the trouble happens to the phone exactly. But i'm not showing and explain it's by now. My other posted has explain that clearly.

6. Just because what we want to fix is only the phone bad application that mean we do not really want any other of UDA file [ it's contents trailer ]. If UDA has ready on the field now hit Write Flash and wait it completion.

7. After Flashing finished now time to reset all setting of the phone to finalizing. Tick some options on UI Options then hit UI Settings. And wait for all OK messages shown up. FINISH.

Disconnect UFS. Remove phone out of UFS Tornado and turn it on. Try any application that wasn't running before such as Facebook or Tweeter application. 

NOTE : You can use highest UDA version even the phone has lower MCU and PPM firmware version. I am doing that so you do not need to be afraid.

GOOD LUCK

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

RM-189 Nokia 2310 Flash error solution on Hardware

SALAMUALAIKUM WR WB

In case you have an error report on UFS when flashing dead phone such as NOKIA 2310 RM-189 like i did. Maybe this is a useful advice on how to find out of hardware trouble so we can doing flashing to the phone successfully. Watch my logs on UFS when i'm flashing a dead phone Nokia 2310

Things to prepare for the troubleshooting

a working and precision digital avo meter

eye and your brain 

Open the whole phone 'till you can see all hardware on the printed board.

Set your digital multitester to DC Current measurement below 5 VDC

Go to the baseband and power up the phone using your power supply.

Check only VIO for CPU and Flash chip ic

if the result there is good 1.8 vdc currents for both chips, now you can REBALL THE FLASH CHIP IC, be careful if you have epoxy under the chip. If can't removing the chip don't do this. It can cause of out of box your phone. So do this on your own risk, i have no responsibility to the damage to your phone.

It was work for me, but i don't know with you.

After all let the phone back to normal condition and re-assemble the phone

Next do flashing the phone so it will give second life for your dead phone

FINISH

THANK YOU

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Liion ]

NOKIA C 3-00 Dead phone FLASHING

ASALAMUALAIKUM WR WB

An easy step to perform dead phone flashing using USB cable via UFS3 Tornado HWK.

1. Connect UFS to PC, Open UFS DCTxBB5. Command to Connect

2. Make little change to Action/Mode : Scenario>Manual, Inteface>USB, Speed>Normal. Left BSI to default.

3. Tab BB5 choose phone model, give it at least MCU firmware on Files and Settings.

4. Remove battery out of device, plug USB into UFS USB HUB or prefer to PC USB port.

5. Hit Check command on DCTx BB5 Tool, plugging USB to the device then insert battery to the device.

6. If you're very lucky you can read phone firmware and other software information and save it as backup file if something wrong happens to flashing process. But i wasn't so lucky at all. Nothing can readout on Info command.

7. Fill all firmwares needed to write to the device and hit Write Flash command, do the same way as step number 5 when no response from the device and wait it completes the job.

8. After flashing finished, next go to UI options, check [v] some items on UI options task to perform finishing process after flashing. Hit UI Settings command.

9. Now everything has done. Next try to gathering device information and save all necessary files for fixing other same devices if they had problem to resolve.

Everything readable by now, that's mean your device really in suppose to be state. GOOD JOB

NOTE : By this of what happened to the device before, you should think 'bout what was happen to the device exactly. If you can find the correct answer of this, i guarantee to you that you be able to be a good TEACHER for others. THINK !!! DO NOT ALWAYS BE A GOOGLING TECHNICIAN FOR EVERY TROUBLE YOU FACE.

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

UFS+HWK New Update and How To UPGRADE [ version 2.3.0.0/ 22july2013 ]

ASALAMUALAIKUM WR WB

Good news, has released on july 22 2013 the new version of HWK update client for upgrading our UFSx box + HWK. By this release now we can't download separately the setup files from saruna. All task to upgrade are using online method. That may could a trouble for the reason of bad quality of internet connection. I recommend you to using a cable connection, don't use a wireless connection. Except you pay for the best wireless connection. If you have bad as mine better using cable connection and it work fo' me. I wont say anything 'bout sarassoft new server, because it work very good. Don't forget to kill your anti virus 'till all process finished and hwk ready to use. For professional advance user it would be not so hard. But for us the newbies it will confusing when trouble comes. But don't worry, i will let you know how to do. LET's DO IT. Don't forget to uninstall old version, you can do it by Start menu or Control Panel.

Step 1:

We need a new hwk support suite setup, but we can't go to the sarunasoft support when still running old version 2.2.0.0

To resolving that i would like to help you all the ufs HWK users whose don't has it already.

You can download it below

Step 2:

Extract what you've download and run it as admin if you running Windows 7 or just double click it on Windows XP. It will create a desktop icon name USF_Panel, connect UFS to PC and run it to start.

Step 3:

Once its open you'll face a new upgrade wizard UI. If you do step 2 as wrote, it will detect your UFS on Hardware tab.

Step 4:

On Hardware first click Check Box, it will reads your box id and serial. Again i'm warn you to establish a good internet connection because it will takes over an hour to complete all sessions.

Step 5:

Next click on Update Box button to start upgrading our HWK. Remember this will only upgrading HWK, if it successfully you still can't go to support saruna software. Because it doesn't have Support button like the older.

Step 6: 

Now Tab Software, click Check Server to checkout how many files need to fix on upgrading. All need to upgrade will checked if you an advance user you can uncheck some you don't want. But if you're a new left them like it use to be, don't make any change.

Step 7: 

If there is no problem you can straight to update by clicking Install button. When show error on Install don't be panic. Back to tab Hardware again and back to click Check Box. Then You can go back to tab Software and re-click Check Server and next click on Install.

Step 8:

After click Install it start to upgrade your HWK. Wait and see, at some reasons i recommend you to kill your anti virus. Some files caught as virus by my MICROSOFT SECURITY ESSENTIAL. So it will bothering too much on upgrade process. The upgrade will start to download and install UFS Sams, UFS LGGsm, UFS DCTxBB5 and the last UFS SEDBx. If you not make any change it will create desktop icon for all, so it will useful for check the process failed or succeed.

Step 9:

The left over files failed to upgrade would be stay check marked.

Step 10:

To resolving that you need to perform clicking Install button again. If it wasn't work you don't need to be panic or event hang up. There will be some UFS shortcut icon on the desktop, you can minimize wizard and try UFS DCTxBB5 to proof it failed. And don't gave up if Install process still failed.

Step 11:

To resolving this, then get back upgrade wizard to desktop, back to tab Hardware and Check Box again. You can check how many files exactly left caused upgrade failed.

Step 12:

Next Tab Software again and do Check Server first then click Install. And see below this call succeed.

Step13: 

Once all has finished don't forget to copy sam_DHT so you can run UFS_SAMs and sure to flashing SAMSUNG ANDROID,unlock bootloader and more using THE SUPER MAGIC UFS TORNADO with HWK. Now try to run UFS DCTxBB5 to check what changed.

Don't forget to go to support area to download of what you need there. Now it becomes more powerful. Hopes it will beat MXBOX on the next update and it is reasonable.

Have you go to the support area with this new version and make it??? i have, and you should...

GREAT JOB GREAT UPDATE OF SarasSoft TEAM EVER 

For more samsung DHT, bleow some links fo ya:

- PART 1

- PART 2

- PART 3

- PART 4

- PART 5

- PART 6

- PART 7

I think it wasn't so difficult, its only need to know why gathering error and how to handle failed process. Hopefully it will gift profit to all my blog reader. And thank you so much for every you comes here to haribagibagi.blogspot.com.

Happy New Year 1434 for All Moslems around the world.

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]