Tuesday, December 11, 2012

Dead USB flash via mxkey

ASALAMUALAIKUM WR WB


Haven't bought HTIBox yet? No problem just forget it. Let's play ur MxKey

Now we gonna try to flash a NOKIA phone use this tool. So we need a USB cable and fully charged battery only. Let's try

1. Open mobileEx
2. Interface box select nokia usb rom, click connect

3. Fill at least a mcu firmware of problematic phones
4. Click bus check button, connect the USB cable to the phone, insert the battery into the phone and briefly press the phone on / off button

5. When the phone is connected properly to the mxkey after bus check the firmware to be disappear / blank on mxkey.
6. Refill the firmware by double-clicking on each column. This time must be filled to content firmware not only mcu firmware.  then click the flash button to start the process of flashing the phone. [ Read ASK and PM first before running flash ]

7. Back off the usb cable and battery from the phone, after you click the flash plug the usb cable back on the phone, insert the battery and briefly press the on / off button on the phone.

8. Wait for the flashing process is complete and the last mxkey boots to the phone and read through the information to your new phone's firmware.



9. Click disconnect to end

Made it easy
Even Guns 'n Roses said to me IT SO EASY
You've just done a called Dead USB Flashing. NICE!!!
And still a NEWBIE like you, that's Me

wasalamualaikum wr wb

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Baca juga posting



No comments:

Post a Comment