ASALAMUALAIKUM WR WB
Prepare equipment work as follows :
- SeTool Box
- USB cable CA-101 or equivalent
- Cell phone battery is charged at least 50%
How does the flashing :
1. Run the program setool2g.exe
2. SEMC ODM tab choose the W150i Yendo handset
3. Settings tab for more options tick signed mode and customize phone
4. Back to SEMC ODM tab, press the Identify.
5. Press and hold the phone home button, plug the usb into the phone, insert the battery into the phone. press and hold the home button and release the home button after the progress bar setool2g start.
6. See the results of the identification of problems that occur in the mobile software in the box of setool2g log.
7. Before proceeding further do the phone GDFS file backup, press the Read GDFS on setool2g. Loose usb cable and battery from the phone.
8. Press and hold the home button the phone, plug the usb cable to the phone, insert the battery into the phone. Release the home button after the progress bar running.
9. See readings GDFS file in the box of setool2g log.
10. I assume the problem such as mobile phones that I use on a case this time.
11. Press the Add button and get some the required firmware files to put from the drive where you store the setool2g firmware.
12. Press the Flash
13. Unplug the usb cable and battery from the phone. Press and hold the home button on the phone, plug the usb into the phone, insert the battery into the phone. Release the home button after the progress bar running.
14. Last to do Unlock / Repair. Loose usb cable and battery, press the Unlock / Repair. Press and hold the home button, plug the usb into the phone and attach the cell phone battery. Release the home button after the progress bar running.
That's all and FINISH
wasalamualaikum wr wb
Arek NGAJUM IsoIso Ae [The Fully Fuckin' Headache Lion]
No comments:
Post a Comment